The Fabric Packaging Machine: a PLC Application
A machine that packages fabrics (roller shutters) fully automatically by means of a PLC.
https://www.electronics-engineering.com/en/the-fabric-packaging-machine-a-plc-application/

A machine that packages fabrics (roller shutters) fully automatically by means of a PLC.
The project was actually built at the company Ventrella in Putignano (BA).
The programmable logic controller: PLC, is the cheapest microcomputer designed to work as a command system for industrial automation.
Through the input module the PLC receives electrical signals from the sensors, processes them by running the stored program and, through a suitable output module, sends electrical signals to actuators. To follow the evolution of the controlled process as closely as possible in real time, execution is cyclic: a pointer register indexes the program instructions in sequence up to the last one, and then starts again from the first. In the simplest cases a PLC can be limited to performing logic, timing and counting functions, but it can also perform arithmetic operations, comparisons and regulation; moreover it contains PID modules that can be programmed if a closed-loop system has to be regulated. The PLCs on the market differ essentially in the way they handle input and output information. In asynchronous handling, an input is read on the input module when the program queries it and the output it controls is updated at the corresponding output instruction. This method brings the PLC close to the real-time operation typical of hard-wired logic. (this type of PLC is the one used in most cases)






Sono l'autore di questa pagina su «La Confezionatrice Teli Applicazione del PLC». Se qualcosa non è chiaro, se vi serve un esempio in più o volete approfondire un punto, scrivetelo qui sotto nei commenti: rispondo personalmente. Se la pagina vi è stata utile, lasciate un voto con le stelle in cima all'articolo.