Vai al contenuto
ELECTRONICS ENGINEERINGelectronics-engineering.com
Archivio Teoria dei Sistemi

HP 48G Programs for System Theory

https://www.electronics-engineering.com/it/articolo_206-programmi_hp_48g_di_teoria_dei_sistemi.htm

Ti è stata utile questa pagina? Votala:
media 4,0 su 1 voto
hp48g calculator
still one of the best calculator

Questo articolo non è ancora disponibile in italiano: stai leggendo la versione originale (inglese). La traduzione italiana è in preparazione.

Archived article: written in 2018 and no longer updated. Some information, software or links may be out of date.

There are currently SWs able to perform symbolic calculations and get results in short time. However having the ability to have a programmable calculator is still important during the exams. One of the programmable calculators that had a great story was the HP 48G. Below all the codes I did when examining the Systems Theory.

MATRIX RANGE

This HP48 program determines the range of a matrix. It outputs the basis vectors and handles matrices up to 4 dimensions.
1: MATRIX

« 
  TRN NUCLEO DROP
  DUP
  IF { } == THEN
    "IL RANGE RAPPRESENTA TUTTO LO SPAZIO" MSGBOX DROP
  ELSE
    DUP SIZE 'DIM' STO
    IF DIM(2) == 2 THEN
      { x1 x2 } 'vet' STO
      [ 0 0 ] 'NUL' STO
    END
    IF DIM(2) == 3 THEN
      { x1 x2 x3 } 'vet' STO
      [ 0 0 0 ] 'NUL' STO
    END
    IF DIM(2) == 4 THEN
      { x1 x2 x3 x4 } 'vet' STO
      [ 0 0 0 0 ] 'NUL' STO
    END

    DIM(1) EVAL 'DIM' STO
    0 'cont' STO
    1 DIM EVAL
    FOR j DUP
      IF NUL == THEN
        DROP DIM 1 - 'DIM' STO
      ELSE
        HOME RANGE vet
        *
      END
      ROLLD cont 1 + 'cont' STO
    NEXT
  END

  { cont NUL vet DIM n } PURGE
»

MATRIX CORE

This code is able to perform the matrix core in both vector form and equations
1: MATRIX

« 
  'Fr' STO  \ Store the input matrix in 'Fr'
  Fr Fr
  SIZE 'DIM' STO  \ Get the size of 'Fr' and store it in 'DIM'
  { 'DIM(1)' } 0 CON 'DIM(2)+1' EVAL COL+  \ Adjust dimensions
  'Fr' STO  \ Store the adjusted matrix back in 'Fr'

  \ Handle different dimensions
  IF 'DIM(2)==2' THEN
    { x1 x2 } 'vet' STO
    [ 0 0 ] 'NUL' STO
  END
  IF 'DIM(2)==3' THEN
    { x1 x2 x3 } 'vet' STO
    [ 0 0 0 ] 'NUL' STO
  END
  IF 'DIM(2)==4' THEN
    { x1 x2 x3 x4 } 'vet' STO
    [ 0 0 0 0 ] 'NUL' STO
  END

  Fr RREF  \ Reduced row echelon form of 'Fr'
  COL SWAP DROP 1 - COL ROW DROP 'DIM(1)' EVAL 'DIM' STO  \ Adjust matrix dimensions
  1 DIM 0 'cont' STO

  \ Loop through dimensions
  FOR j DUP
    IF NUL == THEN
      DROP DIM 1 - 'DIM' STO
    ELSE
      DUP HOME
      HURWI UTILITY A~~L
      HOME RANGE vet *
      LIST 0 = Q DIM 1 +
      ROLLD DIM 1 +
      ROLLD cont 1 + 'cont' STO
    END
  NEXT

  cont LIST 'eqz' STO
  cont ROW 'matr' STO
  { NUL vet cont Fr } PURGE

  matr SIZE 'DIM' STO
  'DIM(2)-DIM(1)' EVAL 'DIM3' STO

  \ Handle the case where DIM3 > 0
  IF DIM3 0 > THEN
    0 'n' STO
    DO
      { DIM3 'DIM(2)' } 0 CON 'matr2' STO
      matr ROW DROP

      IF n 0 < THEN
        1 DIM3 FOR q DROP NEXT
      END

      matr2 ROW DROP 'DIM(2)' EVAL ROW 'matr' STO
      n 1 + 'n' STO
      n 'm' STO
      'DIM(1)' EVAL 1 + 'DIM(2)' EVAL

      FOR j
        IF n > DIM(2) THEN
          1 'n' STO
        END
        matr {j n} 1 PUT 'matr' STO
        n 1 + 'n' STO
      NEXT

      m 'n' STO
    UNTIL matr RANK 'DIM(2)' EVAL == END

    { matr2 m } PURGE
    'DIM(1)' EVAL 1 + 'DIM(2)' EVAL

    FOR j
      { 'DIM(2)' } 0 CON { j } 1 PUT
      matr LSQ 4 RND
    NEXT

    DIM3 ROW
  ELSE
    { }
  END

  eqz { DIM DIM3 matr eqz n } PURGE
»

EIGENVECTORS GENERALIZED

AUTGEN
This cose is able to perform generalized eigenvectors
3: autovalore
2: autovettore generalizzato di ordine appena minore
1: matrice

'Fr' STO
'avt' STO
'avl' STO
Fr SIZE 'DIM' STO
HEAD IDN avl * Fr -
'Fr' STO
Fr avt NEG STO
DIM HEAD 1 + COL+
'Frplus' STO
IF Fr RANK Frplus RANK ==
THEN
    Frplus 'Fr' STO
END
IF 'DIM(2)==2'
THEN
    [ 0 0 ] 'NUL' STO
END
IF 'DIM(2)==3'
THEN
    [ 0 0 0 ] 'NUL' STO
END
IF 'DIM(2)==4'
THEN
    [ 0 0 0 0 ] 'NUL' STO
END
Fr RREF
COL SWAP 'avt' STO
1 - COL DROP ROW DROP
'DIM(1)' EVAL 'DIM' STO
1 DIM FOR j
    DUP IF NUL ==
    THEN
        DROP DIM 1 - 'DIM' STO
        ROW DROP 'avt' STO
    ELSE
        DIM ROLLD 'avt' STO
        nue ROW→ 'avt' STO
    END
NEXT
DIM ROW→ 'matr' STO
SIZE 'DIM' STO
(2)-DIM(1) EVAL 'DIM3' STO
IF DIM3 0 > THEN
    0 'n' STO
    DO
        DIM3 'DIM(2)' 0 CON 'matr2' STO
        DIM3 0 CON 'avt2' STO
        matr ROW DROP
        IF n 0 <
        THEN
            1 DIM3 FOR q DROP NEXT
        END
        avt ROW DROP 'nue' STO
        IF n 0 <
        THEN
            1 DIM3 FOR q DROP nue 1 - 'nue' STO NEXT
        END
        nue ROW→ 'avt' STO
        matr2 ROW DROP 'DIM(2)' EVAL ROW→ 'matr' STO
        avt ROW DROP avt2 ROW DROP 'DIM(2)' EVAL ROW→ 'avt' STO
        n 1 + 'n' STO
        'm' STO 'DIM(1)' EVAL 1 + 'DIM(2)' EVAL FOR j
        matr { j n } 1 PUT 'matr' STO n 1 + 'n' STO NEXT
        m 'n' STO UNTIL matr RANK 'DIM(2)' EVAL ==
    END
    'DIM(1)' EVAL 1 + 'DIM(2)' EVAL FOR j
    avt { j } 1 PUT 'matr' STO NEXT
    DIM3 ROW→
ELSE
    { } "Non ci sono altri autovettori generalizzati" MSGBOX
END
{ DIM Fr avt2 nue Frplus avl matr2 m NUL vet cont DIM3 eqz n matr avt } PURGE

La lista completa di tutti le funzioni create sono presenti nel seguente file:

Iscriviti
Notificami
guest
0 commenti
Vecchi
Più recenti Le più votate
0
Esprimete la vostra opinione commentando.x