5 to 10 V High-Frequency Square-Wave Amplifier
This article presents an amplifier circuit designed to turn high-frequency 5 V square waves into 10 V ones. The circuit was specifically designed to amplify pulse signals…
https://www.electronics-engineering.com/en/5-to-10-v-high-frequency-square-wave-amplifier/

This article presents an amplifier circuit designed to turn high-frequency 5 V square waves into 10 V ones. The circuit was specifically designed to amplify pulse signals lasting 20 microseconds, in order to simulate a 10 V signal at a frequency of 1PPS, commonly used as the output of GPS receivers.

The circuit was simulated with PSPICE by feeding it a 40 µs pulse signal at the input


It can be seen that the circuit has a delay of only 2 microseconds between input and output, which makes it suitable for amplifying pulse signals lasting on the order of 10 microseconds. It is therefore perfectly suited to amplifying the 1PPS signal with a duration of 20 microseconds.
A WORKING EXAMPLE WITH INTERRUPT AND SERIAL COMMUNICATION
This amplifier was used to amplify the pulse generated by the Arduino described in the attached post






Benvenuti nella pagina su «Amplificatore di onde quadre da 5 a 10V ad alta frequenza». L'ho scritta pensando a chi studia ingegneria elettronica: se un passaggio non vi torna, un esercizio vi dà un risultato diverso o volete altro materiale sull'argomento, chiedete pure nei commenti e vi risponderò. Un voto con le stelle qui sopra mi aiuta a capire quali pagine migliorare.